bucket elevator

Performance characteristics ：

1、 the overall appearance of beautiful, small size, less power consumption, transmission capacity.

2、The transmission mechanism is reasonable and reliable, and the head wheel adopts the technology of CAM coating to increase the friction coefficient and reduce the deviation of the bucket belt. Because the head wheel uses the machinery to wrap the glue, after wearing, changes simply.

3、 Adopt high-strength plastic dustpan, so the Dustpan has long service life and reliable full load coefficient.

4、 Adopt strong bucket belt, high tensile strength, low elongation and long service life.

5、 the working parts adopt mechanical bending, welding, sealing performance is good.

6、The tail wheel is a squirrel-cage structure, which can reduce the breakage rate.

7、 the machine is equipped with a stop, when the power failure, the hoist suddenly stopped running, material will not be poured into the bottom of the hoist, reduce the pick material. When overhauling, the belt can not be reversed due to the stopping action, thus ensuring the safety of overhaulers.

8、The machine base can be installed with the straight and reverse feed hopper, which can be used by the user on demand.

9、tensioning device can be used screw-type or gravity tensioning.

10、 safe and secure, in addition to the head with explosion-proof mouth, the machine can be installed according to user requirements of multiple explosion-proof mouth (for powder) , can effectively prevent dust explosion (such as for mines) .

 11、 according to the user's requirements can choose speed monitoring, deviation alarm device, blocking material alarm device, gravity tension limit switch (when gravity tension, lead screw tension without this item) , can be linked with the control system, make sure the production is normal.

12、 the observation cylinder can be opened on both sides for easy installation and replacement of the bucket and belt. There is a glass window on the canister cover, you can observe its operation and whether there is any material in the bucket.

13、The dimension of the inlet is about 0.8 times of the width of the bucket, so that the material entering the base of the elevator can be filled with the bucket, thus increasing the filling rate of the bucket. The installation height is optional, but not higher than the height required in the main parameter list.

Production workshop

Production equipment

Factory area

Honor and Qualification